Injector structure finished
07.11 2019, praksa Maker space
The structure of the injector is almost done, so now comes the electronic parts.. | 
Starting a Spectroscope
30.09 2019, Mala galerija ULUPUDS, Belgrade
Spectroscope is a device which will allow us to recognize different types of plastic even if they are not marked. The ordered parts are slowly arrivin... | 
The Open Workshop at ULUPUDS Gallery
28.09 2019, Mala galerija ULUPUDS, Belgrade
During one week we will be presenting our work in the Small gallery of Applied Arts in Belgrade (ULUPUDS Gallery), where we are also moving a part of ... | 
Breaking a Chair
21.08 2019, Krnjaca - refugee camp
Finally we are back from vacations and the workshop is full of new plastic pieces ready for breaking and shredding. Reza took a challenge to de-fragme... |
New contigent of materials
06.08 2019, Krnjaca - refugee camp
As the exhibition is finished we finally could bring all of the plastics which were kept there on display. There will be a lots of work today... | 
Injection Mould for the Shroom
06.08 2019, Fine Arts Faculty Belgrade
The professor on the Fine Arts Faculty, Rajša, offered us to make the first test mould casted in aluminum... We came to the fraculty department to do ... | 
Peđa finishing the injection mould
06.08 2019, Fine Arts Faculty Belgrade
It was necessary to thread the hole to the mould and make canals. | 
Shredder Box Remont
01.08 2019, Krnjaca - refugee camp
Today there was a problem with the shredder box and we used this opportunity to do a general remont. Here are Khairullah and Wais leading the operatio... |
Our 1st purchase of waste plastic from neighbourning Roma Settlment
31.07 2019, Krnjaca - refugee camp
When we went to a Roma settlement to find a young guy Dževad and give him a bowl in which fabrication he took part last winter when Roma settlers brok... | 
Assembling the New Shredder
29.05 2019, Krnjaca - refugee camp
Finally we are slowly starting to assemble the new
double shredder. With it it will be possible to
shred 2 types of plastic at the time without a
n... | 
Curious crowd
16.05 2019, Krnjaca - refugee camp
There is always new guys in the camp who peek
through the window of of our studio in the camp.
We chat a little bit and invite them to join us
insi... | 
Mould by Comission
15.05 2019, Krnjaca - refugee camp
A dutch fashion designer Danielle Van Camp
commissioned us to produce a mould for the hat
stripes. Here it is assembled but still needs some
improv... |
Safety Regulations
14.05 2019, Krnjaca - refugee camp
Keeping safe is very important especially for the
youngest mates :) such as Mortaza. | 
Extending the Workshop
08.05 2019, Krnjaca - refugee camp
Khairula has an experience of working in
car mechanic workshop in Afghanistan so he
could very fast take over lots of tasks
requiring technical ski... | 
06.05 2019, Krnjaca - refugee camp
| 
Shredding full speed
23.04 2019, Krnjaca - refugee camp
To break the plastic in smaller pieces, so it can
fit the shredder, is a task that requires some
more strength, luckily there are always some guys
... |
20.04 2019,
| 
Spanish Video Artist Discovering New Medium of Expression
18.04 2019, Krnjaca - refugee camp
An old friend from Spain who visited Belgrade for
his exhibition came to visit our workshop in the
camp. He made some experiments with the extruder
... | 
Would you like some coffee or tea?
11.04 2019, Krnjaca - refugee camp
The guys are using a window as a shortcut if they
want to borrow from us anything they might need at
the moment, such as tools, cigarettes, or simil... | 
Mortaza and the Rabbit
10.04 2019, Krnjaca - refugee camp
Mortaza got the rabbit and came to show it to us,
his dream is to have a cat when he finally arrive
to Germany.. |
I made this
05.04 2019, Krnjaca - refugee camp
Bowl made on the extruder | 
I made this
05.04 2019, Krnjaca - refugee camp
Bowl made on the extruder | 
Arteza in action
04.04 2019, Krnjaca - refugee camp
Our close friend who is working with minipogon for
some time now is always finding the ways of
improving either the products we are making,
suggest... | 
Extrusion talents
03.04 2019, Krnjaca - refugee camp
|
Extrusion talents
03.04 2019, Krnjaca - refugee camp
A group of guys came to our studio, for the first
time, tried to work on the extruder and some of
them without much instructions did a great job,
f... | 
New Guys Joining
26.03 2019, Krnjaca - refugee camp
The barrack where our workshop is placed
remained empty during all of the winter,
but with the spring new arrivals are
coming, and this week we got... | 
Ali Hazrat
14.03 2019, Krnjaca - refugee camp
| 
Dividing plastic by color
13.03 2019, Krnjaca - refugee camp
After cleaning the plastic we have to divide it by
the color, to be able to control visual patterns
of future products. |
Friends
12.03 2019, Krnjaca - refugee camp
Mortaza 8 year old boy comes to our studio almost
every time we are there, sometimes just for fun
other times he engages in the work very seriously.... | 
Students from college of fine and applied arts visiting
07.03 2019, Krnjaca - refugee camp
| 
Afternoon activities
07.03 2019, Krnjaca - refugee camp
Since the weather started to get warmer many more
of the camp inhabitants are visiting us in the
studio. Very fast they are able to get involved in
... | 
Students of Fine and Applied Arts Visit
07.03 2019, Krnjaca - refugee camp
Today we had a visit of over 20 art students and 3
professors. It was conceived as a practical
training for the students also potentially
participa... |
Mayla, a volonteer from Berlin
07.03 2019, Krnjaca - refugee camp
Mayla is volunteering in Sarajevo and had worked
in the refugee camp there until the access to the
volunteers was denied. Before returning to Berlin... | 
Fusing Cut-offs Test
06.03 2019, Krnjaca - refugee camp
An interesting test done by fusing cut-offs
left from cutting the laminates for the
clip-boards. The quality of fusion is very
good and very happy ... | 
Reading time
05.03 2019, Krnjaca - refugee camp
Sometimes one needs to stop and think | 
Danilo dropped by, just to say hello
28.02 2019, Krnjaca - refugee camp
After a long time not being able to work with us
due to many different obligations, finally today
Danilo had some time to spare and join us to work
... |
Red is the color
27.02 2019, Krnjaca - refugee camp
Sometimes we are very lucky to find many pieces of
plastic in the same color | 
Transporting the Estruder from Miksalište
26.02 2019, Miksaliste - Refugee Day Center, Belgrade
Finally we are leaving the Miksalište
completely taking all our remaining things
there to Krnjača. Now we will have all of
the machines on one... | 
Washing to begin with
22.02 2019, Krnjaca - refugee camp
These cups are collected on two different
locations in the city, one is EU Info Center where
they collect plastic cups for us, after events
they ha... | 
1984. plastic I
22.02 2019, Krnjaca - refugee camp
Struggle to break one old plastic barrel which was
made in 1984 and still looks and behaves like new. |
1984. plastic II
22.02 2019, Krnjaca - refugee camp
Almost done, with a little help from friends in
the camp and from the boat... | 
Quiet afternoon
19.02 2019, Krnjaca - refugee camp
Due to very nice weather almost all the people
living in the Camp where rather outside playing
sports, we didn't have many visitors it was a good
t... | 
Brand new/old resources
19.02 2019, Krnjaca - refugee camp
Streets of Belgrade are truly inspiring, every
time our friend N.M. goes for a walk minipogon is
working full speed. | 
Kids department
12.02 2019, Krnjaca - refugee camp
Because the machines are not for kids to use, we
let them draw on the walls...and enjoy great
decoration surrounding us. |
After work chat
12.02 2019, Krnjaca - refugee camp
Who is going and where, or is it maybe better to
stay... | 
Vlasto, join the conversation!
07.02 2019, Krnjaca - refugee camp
Vlasta, who is working on the maintenance in the
camp, likes to drop by and have a coffee from time
to time. | 
Friends from Belgium and Austria, visiting
07.02 2019, Krnjaca - refugee camp
People who are coming to Belgrade for different
reasons usually are very curious to see our studio
and work with us. | 
Visit from Handicap Cap
17.01 2019, Krnjaca - refugee camp
Today we received a visit to our studio from the
group of Handicap Cap (Čep za hendikep). Handicap
Cap is an humanitarian initiative dedicated ... |
Redha in action
15.01 2019, Krnjaca - refugee camp
Our friend Redha is getting more activated in the
studio work. And also he is bringing some
novelties in the production process. | 
4 years detained in Serbia and proud
07.01 2019, Krnjaca - refugee camp
Some people from the Camp are coming to our
workshop for a chat and some like to work on the
machines more. | 
New Kids on the Camp
26.12 2018, Krnjaca - refugee camp
| 
New Kids on the Camp
26.12 2018, Krnjaca - refugee camp
Action wall painting and learning some English.. |
New Kids on the Camp
26.12 2018, Krnjaca - refugee camp
Our small visitors from neighboring Roma community
are showing lots of interest for the procedure of
plastic recycling. They indeed helped us (also
... | 
A Motor for the new shredder
25.12 2018, Bolex, Vojvođanska 106, Surčin
We went to see the motors for the new
shredder to a place in Surčin, and found a
good one. 1.5 kw, 70rpm. It was even
cheaper than the one we ... | 
Assistant
20.12 2018, Krnjaca - refugee camp
Sometimes kids from camp are coming to our
workshop mostly to play with plastic toys we
collect, but also they get curious about machines
and enjoy... | 
reza's cat
19.12 2018, Krnjaca - refugee camp
a friend from the camp has adopted a cat that goes
everywhere with him. |
plastic jewelry - making of
18.12 2018, Krnjaca - refugee camp
experimenting with the new possible products,
having a lot of colorful boards (from the T-shirt
press) we decided to make pieces for earrings or
ne... | 
Visitor from the neighborhood
12.12 2018, Krnjaca - refugee camp
A friend Ivan who lives in the Camp neighborhood
visited us today in the workshop. He and all opf
his family worked in the Trudbenik factory which
... | 
2 mm sheet sample PP
12.12 2018, Krnjača - refugee camp
With new T-shirt press we are able to produce thin plastic
laminates. This is one sample made from polypropylene,
2mm thick. | 
Kids came to play
12.12 2018, Krnjaca - refugee camp
Sometimes in the collected plastic, that is found
in the streets of Belgrade, we have toys for
children. This is what can happen if a child finds
o... |
Equipping the Workshop
11.12 2018, Krnjaca - refugee camp
Long research and consultations about what
kind of welding machine we should get
finally ended with a decision to buy the
Varstroj 160 amp. It see... | 
Call for the Workshops
11.12 2018, Krnjaca - refugee camp
Winter days bring even more desolate mood
in the Camp. We decide to make an effort to
invite more people to the open workshops
where with a new equ... | 
Key-chains for the Baracks
11.12 2018, Krnjaca - refugee camp
Some time ago camp management suggested
that we could produce the key-chains from
recycled plastic for each of the 18
barracks in the Camp. Today w... | 
Plastic Cut
27.11 2018, Krnjaca - refugee camp
In half an hour all plastic objects were
cut in smaller pieces suitable for
shredding. But they still have to be washed
before shredding. |
Processing the new contingent of plastic
27.11 2018, Krnjaca - refugee camp
At some moment Rahmani with a new brother showed
up in a studio and without a question started
cutting the plastic objects from a new contingent
br... | 
New Contingent of Plastic Brought by Nebojša
27.11 2018, Krnjaca - refugee camp
Nebojša brought us a new contingent of
plastic he collected, just in a good moment
as we were getting out of material for work. | 
Cold Weather Keeps us Indoors
20.11 2018, Krnjaca - refugee camp
The temperatures had suddenly went sharp
down this week and for the first time since
we installed the workshop in Krnjača we are
forced to wor... | 
Krnjača / Day 10
13.11 2018, Krnjaca - refugee camp
Another day goes by, someone is working, someone
just enjoys watching others work. All in all we
are having a good time. |
Bowls Photo Session
13.11 2018, Krnjaca - refugee camp
Today we were doing lots of work on
finishing the bowls and taking pictures of
them as we are preparing to offer them for
sale. | 
Krnjača / Day 10
13.11 2018, Krnjaca - refugee camp
The weather is still great so we can work outside,
people are joining our work day slowly. In the
camp nobody rushes, the time is running slowly. | 
Krnjača / Day 9
12.11 2018, Krnjaca - refugee camp
We are preparing and cutting the plastic into
smaller pieces for shredding. | 
Krnjača / Day 9
12.11 2018, Krnjaca - refugee camp
Shredder seams to be the most interesting machine.
Probably because the result is visible immediately. |
Krnjača / Day 8
07.11 2018, Krnjaca - refugee camp
Next day completely different situation in the
camp.Now it is again crowded. And again a lot of
people are interested in what we are doing. | 
Krnjača / Day 8
07.11 2018, Krnjaca - refugee camp
Finishing the edges is quite interesting job to do. | 
Empty Camp
06.11 2018, Krnjaca - refugee camp
Today in Krnjača the camp was emptied, no
one to play cricket or sit around. After a
while one guy came around and explained us
why. big group... | 
Translucent Green
06.11 2018, Krnjaca - refugee camp
Nevertheless we continue working, today we
tested translucent polypropylene plastic
that was shredded yesterday. The result
seems to be very intere... |
Krnjača / Day 7
06.11 2018, Krnjaca - refugee camp
Now that the Game is on, the youngest, that have
stayed, finally can see what is going on. | 
Krnjača / Day 6
01.11 2018, Krnjaca - refugee camp
Our friends Wajid and Rahmani are joining us in
the work. We took out Wajids pot from the oven and
he is doing the finishing. Rahmani looks for the
... | 
Krnjača / Day 6
01.11 2018, Krnjaca - refugee camp
As the rain started we brought all the machines
inside. Wajid and Chow are cleaning the shredder,
while our friend the cleaner of the camp joied us
... | 
Krnjača / Day 6
01.11 2018, Krnjaca - refugee camp
View of our working place. Its quite a mess
although we try to keep it tidy. We hope to be
allowed to install some shelves, at least for
displaying... |
Plastic for Shredding
01.11 2018, Krnjaca - refugee camp
All plastic collected bu Nebojša is brought
to our workshop space in Krnjača camp. We
are slowly starting to select it and shredd
it. Thanks t... | 
Extruder - 1st Products
31.10 2018, Miksaliste - Refugee Day Center, Belgrade
Some first tests with the Extruder are
being done, and we still have to excersize
a lot in order to fully dominate this
technique. We made a knife ... | 
Bowl HDPE
30.10 2018, Krnjaca - refugee camp
A colorful bowl made from HDPE bottle lids,
with new method of iron finishing. | 
Krnjača / Day 5
30.10 2018, Krnjaca - refugee camp
Wajid is pouring shredded plastic in the bowl. He
is doing it very carefully. |
Krnjača / Day 4
25.10 2018, Krnjaca - refugee camp
Cleaning and shredding plastic,every participant
has a task to do. | 
Plastic Tiles
25.10 2018, Krnjaca - refugee camp
Plastic tiles 1cm wide, could be used for
diverse purposes.. We are planning to make
key chain pendant from them for the camp
management purposes. | 
New Bowls from Krnjača
25.10 2018, Krnjaca - refugee camp
New bowls have been made in our new working
space in Krnjača refugee camp. | 
Shredded plastic
25.10 2018, Krnjaca - refugee camp
We are separating shredded plastic by
colors as well (apart from plastic types PP
and HDPE). For the moment we shredded
almost all of plastic thing... |
Shredding Plastic
25.10 2018, Krnjaca - refugee camp
We are catching up with the working routine
in the camp. Usually arriving around 12h
and starting to prepare for the work.
Taking machines outside,... | 
Krnjača / Day 3
24.10 2018, Krnjaca - refugee camp
In the meantime of shredding we are also using the
occasion to learn some pashto. | 
Krnjača / Day 3
24.10 2018, Krnjaca - refugee camp
Today we had with us a Colombian artist Juan David
Galindo, who in couple occasions joined us already
in the workshops in Miksalište. | 
Krnjača / Day 3
24.10 2018, Krnjaca - refugee camp
While we are starting to work our young friends
are arriving from the lunch and gathering on the
window of our workshop space. |
Krnjača / Day 2
23.10 2018, Krnjaca - refugee camp
...and in the end it was a very productive day | 
Krnjača / Day 2
23.10 2018, Krnjaca - refugee camp
At the beginning everybody we're just looking how
process is conducted... | 
Krnjača / Day 2
23.10 2018, Krnjaca - refugee camp
Then they joined... taking different tasks,
shredding, washing and cutting plastic.. Wajid,
Ahmed, Nagib, Rahman, etc. | 
Day 1 - arranging the space
22.10 2018, Krnjaca - refugee camp
Working space arranged! Machines, plastic, tools
now have their place in this colorful room. This
is going to be our working space for next 5
month... |
Day 1 - arranging the space
22.10 2018, Krnjaca - refugee camp
Working space arranged! Everything is prepared
for tomorrow, workshops can beguine! | 
Day 1 - bringing equipment from Miksaliste
22.10 2018, Krnjaca - refugee camp
Arranging equipment - transferring machines,
tools and plastic from the van to the new asined
space in Krnjaca refugee camp (Building no. 15)
with ... | 
Assigned Space in Krnjaca Camp
11.10 2018, Krnjaca - refugee camp
Today we visited Krnjaca camp to check the
space that was assigned to us for
installing our machines. The room is
spacious and full of light. Only ... | 
EFC meeting camp in Rome - Workshop Day 2
22.09 2018, Centocelle - Rome
Today we have visited High Art School in
Centocelle part of the City of Rome where we
have taken a part in public event "City and
work: creating... |
|
